Grafica News - January 2014

The Importance of Off-Contact for Industrial Printing Applications - Part 2

By Dawn M. Hohl-Nowlin, USA - Uncommon Enterprises LLC

Dawn Hohl-Nowlin is a Technical Trainer and Consultant on screen printing. Her industry experience includes 18 years with SPTF/SGIA, USA, overseeing screen printing workshops, developing training resources and conducting process-related research. She is a member of the Academy of Screen and Digital Printing Technology (ASDPT). She can be reached at uellc@comcast.net

In Part 1 of this article published in the December 2013 issue of Grafica News India, we had explained the influence of off-contact on print quality, registration, ink deposit/color, mesh, stencil and squeegee durability and production speeds.

Let us now explore how to minimize, measure and control offcontact distances to produce a sharp and repeatable image in industrial applications.

Minimizing Off-contact:

Screen tension should be the first area to improve in the pursuit of lower off-contact distances. Higher operating tensions on your screens will allow reduced off-contact and faster printing speeds. Keep in mind that larger screens are more difficult to stretch to higher tensions, so consider both screen size and tension when establishing off-contact distances. If screen tensions are increased, the press operator must lower off-contacts, or mesh breakage can occur. Tensions must be consistent screen to screen as well. In fact, consistency is more important than tension value by helping maintain registration color to color, and keeping relative printing force the same.

Squeegee pressure ranks with offcontact as the variables most often changed on press and is in fact inter-related to screen tension and off contact distance. While a change in squeegee pressure will not affect off-contact distance, a change in off-contact is likely to require a change in squeegee pressure. These two variables are so linked that there exists an optimum setting for each of them, in relation to the other, where the quality of the printed product is at its maximum.

Increased off-contact distances require the squeegee pressure to be progressively increased to transfer the ink. The extra force exerted on the screen is magnified at the edges of the squeegee blade. Longer squeegees, relative to the frame size will make this effect even worse (Figure 1). The result is not only increased image distortion at the edges but poor print quality as well.

Ink tack can vary between inks, and is a characteristic resulting from ink rheology, chemistry, pigment size and load, and printing temperature. Lower ink tack will reduce the needed offcontact distance on a well tensioned screen. Modifying or switching the ink is option for reducing ink tack.

The substrate also has a lot of influence on ink transfer and peel. Absorbent substrates will release much easier than non-porous substrates. Substrate surface tensions, as it relates to the ink surface energy, also will have varying effects on peel. Off-contact is also influenced by image area in relation to frame size, and image type. Large spot color areas and reverse images may require more off-contact/peel due to increase surface area in contact with substrate.

While some of these variables are possible to change, others are not. It is important to realize offcontact may have to be adjusted somewhat for each individual job to compensate for different variables.

Measurement

Most automatic and some manual screen printing presses have adjustments available to vary offcontact distance. Some presses have a readout gauge, while others do not. Should you be fortunate enough to have a press with readout to track off-contact distance, this is the obvious method of measurement.

Those presses without a specific feature to set or read off-contact distance require the operator to shim the screen frame to vary snap-off. There are a number of methods and tricks to gauge and control actual off-contact distance. One of the simplest methods relies on set up spacers like washers or coins of known thickness. These spacers are placed on the four corners of the substrate and the screen moved to just touch each one. Different spacers are used to create various off-contact distances. Calibrated wedges or a simple straight ruler can also be used.

Best Practices

Here are some practices and procedures can you implement to increase your control of off-contact distances in production.

  • Ensure all parts of the press are leveled. It will be difficult if not impossible to achieve good offcontact parallelism if the press itself is not level.
  • Set up tension level standards by standardizing tensioning procedures, using a tensionmeter and tracking screens.
  • Make sure the screens used for any job all have the same tension.
  • Write an easy and effective procedure for setting up offcontact on each press (it may vary with press type). Ensure off-contact distance is set equally in all four corners of the screen. Remember that the gap you need to measure is between the mesh and the top of the substrate. Change substrates and this distance will change.
  • Make it a policy that during a multi-color job, the off-contact distance is the last thing that is changed in order to minimize registration problems.
  • Do some simple testing to determine the lower limits of off-contact you can achieve with your printing conditions. Keep a record of the off-contact distances used on each job on a chart by each press. Review the data to learn about your process.

This is a modal.

Reveal makes these very easy to summon and dismiss. The close button is simple an anchor with a unicode character icon and a class of close-reveal-modal. Clicking anywhere outside the modal will also dismiss it.

×