-
Modular construction.
-
Compact design.
-
Heavy duty foundation bolts for leveling of all individual modules accurately.
-
Complete jet air module with solid steel and double wall construction filled with
imported glass wool with one side aluminum foil coated. Outer body always
remains cool to touch.
-
Anti-Static PTFE Teflon coated fiber glass conveyor belt with rubber roller to
avoid belt breakage, hence increases safety of belt.
-
Conveyor bell drives with imported AC geared motor pre-lubricated coupled with
imported AC frequency inverter (sensor less vector control inverter to maintain
constant torque and constant speed).
-
Digital belt speed indicator in M/Min.
-
Conveyor belt dust cleaning system to avoid dust particles to settle on wet inks.
-
Re-circulating jet air module reduces electrical consumption also reaches the
set temperature level faster.
-
Efficient exhaust system to remove solvent laden air, environment friendly
design.
-
Adjustable duct to remove solvent laden air, depending upon the solvent content
of the ink being dried.
-
Adjustable temperature controller with digital display.
-
Powerful jet air system with special design of nozzles which increases the drying
efficiency of inks.
-
Maximum efficiency of air with minimum temperature is achieved by using high
pressure blowers hence increases the production speeds and minimize stock
variation.
-
Powerful air velocity of 45 M/Sec produces higher turbulence of air helps break
apart solvent molecules which dries the inks faster.
-
All high pressure blowers are mounted with a unique vibration free pads to
reduce machine vibrations.
-
All top hoods are liflable for easy maintenance and servicing.
-
Adjustable electronic temperature controller with digital display.
-
Inlet sheet hold down by highly efficient vacuum system.
-
Cooling chamber design using 100% ambient temp fresh air.
-
Maximum energy and curing efficiency design reduces power consumption
High pressure mercury vapor UV lamps 300 watts/inch can also be run at 200
watts/inch for low production speed if required. Helps reduces power
consumption.
-
Power switching through imported capacitor banks.
-
Ozone free UV lamps.
-
Individual lamp control gear.
-
Easy cleaning 8 maintenance of lamps.
-
Digital display for current lamp hours (re-stable) and total lamp hours.
-
Individual lamp ampere meter.
-
Imported aluminum extruded elliptical concentrate UV irradiators with special
replaceable mirror coated reflective aluminum. sheets for UV light reflections
which transfers maximum energy of UV radiation.
-
Special Teflon coated lamps wires for maximum efficiency of lamp output.
-
Unique temperature sensors with digital indicator to avoid excessive heating of
lamps. Helps increase in lamp life.
-
UV module consists of complete vacuum hold down system for substrate during
curing process. Helps deliver each substrates with uniform curing all over.
-
Powerful lamp cooling system increases lamp life and delivers correct UV
radiation.
-
Compact ballast cum transformer using constant wattage technology (Imported).
-
Transformer coils has excellent insulation properties with vacuum impregnation
technology to reduce transformer humming and failures.
-
All blower motors are coupled with electronic phase failure and overload
protection systems.
-
Lamps and heaters are coupled with miniature circuit breakers for load
protection.
-
Complete control system is protected with earth circuit leakage breakers.
-
User friendly controls.
-
Accurate and durable controls.
-
Major electrical components are "CE" certified.
